Valiant Heavy Duty Aluminium Cable Cleat

The Valiant One Bolt Aluminium single cable cleat is a metallic cleat which has been designed, constructed, and tested in accordance with the International Standard ‘cable cleats for Electrical Installations’ (IEC 61914).

It ensures the retention and securing of single cables, without damaging or deforming the cable. The cable cleat is manufactured from high pressure die cast aluminium (LM20) making it suitable for both indoor and outdoor applications. Due to its unique twin arc internal patent pending design profile it exhibits excellent retention, limiting both the axial and lateral movement. The Valiant One Bolt cable cleat is available in twelve sizes suitable for cable diameters of 10mm up to 71mm. The cable cleat has an M10 clearance hole for securing it to a mounting surface.


  • Third party certification to IEC 61914
  • Available in high pressure die cast aluminium
  • Sunlight (UV) resistant
  • Operating temperature -60°C to +150°C
  • Can be double stacked
  • 10 – 71mm in 12 sizes
  • Excellent axial & lateral load retention
  • Single bolt fixing design
Short Circuit Testing to IEC 61914 - Clause 9.5
Multicore Formation Parallel Formation
One short circuit 600mm fixed cleat centres Two short circuits 600mm fixed cleat centres One short circuit 600mm fixed cleat centres 105mm cable centres Two short circuits 600mm fixed cleat centres 105mm cable centres
0.1 sec 0.1 sec 0.1 sec 0.1 sec
118kA Peak 89kA Peak 90kA Peak 76kA Peak
53.6kA RMS 42.3kA RMS 42.8kA RMS 36.1kA RMS
Type 6.1.1 Metallic 1BCAL - One Bolt Aluminium Cable Cleat
Design Specification IEC 61914
Temperature for permanent application -60°C to +150°C
IEC 61914: clause / part 6.2
Needle Flame Test Pass
IEC 61914 clause
10.0, 10.1, IEC 60695-11-5
Lateral Load Test 5kN - 6kN IEC 61914 clause 9.3
Axial Load Test 1.5kN IEC 61914 clause 9.4
Impact Resistance Pass - Very Heavy
IEC 61914 clause 6.3, 6.3.5, 9.2
Material High pressure die cast aluminium
Material Colour Silver / grey

Coatings are available upon request by adding the following suffixes to the ordering reference - EC for epoxy coating, PC for polyester coating and TC for thermoplastic coating. Example order reference for epoxy coating suffix EC (1BC1013AEC). Fasteners required to secure the cable cleat to the support structure are not included but can be supplied upon request.

Isolation/separation pads (to prevent corrosion between two dissimilar metals) are not included but can be supplied on request - see isolation / seperation page.

Jump to technical illustration    Fixing Pack Information

Product Selection Table

Part No
Cable Ø range
take (in.)
Dimensions (in.)Weight (oz)
WHDEFixing Hole Ø
1BC1013A0.394 - 0.5121.6141.3391.811131 x M102.01
1BC1316A0.512 - 0.6301.7321.4571.811131 x M102.33
1BC1619A0.630 - 0.7481.8501.5751.811131 x M102.61
1BC1923A0.748 - 0.9062.0081.7321.811131 x M102.93
1BC2327A0.906 - 1.0632.1651.8901.811131 x M103.28
1BC2732A1.063 - 1.2602.4022.2051.811131 x M104.02
1BC3238A1.260 - 1.4962.6382.4411.811131 x M104.59
1BC3845A1.496 - 1.7722.9532.8741.811131 x M105.71
1BC4551A1.772 - 2.0083.1892.9921.811131 x M106.38
1BC5158A2.008 - 2.2833.3863.2681.811131 x M107.02
1BC5865A2.283 - 2.5593.7013.5431.811131 x M107.83
1BC6571A2.559 - 2.7953.9763.8191.811131 x M108.47
Part No
Cable Ø range
take (mm)
Dimensions mmWeight (g)
WHDEFixing Hole Ø
1BC1013A10 - 13413446131 x M1057
1BC1316A13 - 16443746131 x M1066
1BC1619A16 - 19474046131 x M1074
1BC1923A19 - 23514446131 x M1083
1BC2327A23 - 27554846131 x M1093
1BC2732A27 - 32615646131 x M10114
1BC3238A32 - 38676246131 x M10130
1BC3845A38 - 45757346131 x M10162
1BC4551A45 - 51817646131 x M10181
1BC5158A51 - 58868346131 x M10199
1BC5865A58 - 65949046131 x M10222
1BC6571A65 - 711019746131 x M10240

Technical Illustration