Zenith Heavy Duty Aluminium Cable Cleat

The Zenith Two Bolt single cable cleat is a metallic cable cleat which has been designed, constructed, and tested in accordance with the International Standard ‘cable cleats for Electrical Installations’ (IEC 61914).

It ensures the retention and securing of single cables, without damaging or deforming the cable. The cable cleat is manufactured from high pressure die cast aluminium (LM20) making it suitable for both indoor and outdoor applications. Due to its unique twin arc internal patent pending design profile it exhibits excellent retention, limiting both the axial and lateral movement. The Zenith Two Bolt cable cleats have an excellent range take and are suitable for cable diameters of 38mm up to 151mm in only nine sizes. This cable cleat has two M12 clearance holes for securing it to a mounting surface, which allows  for either M10 or M12 fasteners to be used.

Features

  • Third party certification to IEC 61914
  • Available in high pressure die cast aluminium
  • Sunlight (UV) & weather resistant
  • Operating temperature -60°C to 150°C
  • Can be double stacked
  • 38 – 151mm in 9 sizes
  • Excellent axial & lateral load retention
  • Two bolt fixing design
Short Circuit Testing to IEC 61914 - Clause 9.5
Multicore Formation Parallel Formation
One short circuit 600mm fixed cleat centres Two short circuits 600mm fixed cleat centres One short circuit 600mm fixed cleat centres 105mm cable centres Two short circuits 600mm fixed cleat centres 105mm cable centres One short circuit 600mm fixed cleat centres 105mm cable centres Two short circuits 600mm fixed cleat centres 105mm cable centres
0.1 sec 0.1 sec 0.1 sec 0.1 sec 1 sec 1 sec
102kA Peak 102kA Peak 130kA Peak 120kA Peak 81kA Peak 71kA Peak
48.6kA RMS 48.6kA RMS 59.0kA RMS 54.5kA RMS 36.8kA RMS 32.2kA RMS
Type 6.1.1 Metallic 2BCAL - Two Bolt Aluminium Cable Cleat
Design Specification IEC 61914
Temperature for permanent application -60°C to 150°C
IEC 61914 clause / part 6.2
Needle Flame Test Pass
IEC 61914 clause
10.0, 10.1, IEC 60695-11-5
Lateral Load Test 18kN - 32kN, IEC 61914 clause 9.3
Axial Load Test 8kN, IEC 61914 clause 9.4
Impact Resistance Pass - Very heavy
IEC 61914 clause 6.3, 6.3.5, 9.2
Material High pressure die cast aluminium
Material Colour Silver / grey

Coatings are available upon request by adding the following suffixes to the ordering reference – EC for epoxy coating, PC for polyester coating and TC for thermoplastic coating. Example order reference for epoxy coating suffix EC (2BC038048AEC). Fasteners required to secure the cable cleat to the support structure are not included but can be supplied upon request.

Isolation/separation pads (to prevent corrosion between two dissimilar metals) are not included but can be supplied on request - see isolation / seperation page.

Jump to technical illustration    Fixing Pack Information

Product Selection Table

Zenith Part No.Cable Ø range take (in.)Dimensions (in.)Weight (oz)
WHDPFixing Hole Ø
2BC038048A1.496 - 1.8903.7802.6772.4022.6382 x M10 / M128.82
2BC048058A1.890 - 2.2834.2133.0712.4023.0712 x M10 / M1210.48
2BC058070A2.283 - 2.7564.6853.5832.4023.5432 x M10 / M1212.59
2BC070083A2.756 - 3.268 5.2364.0942.4024.0942 x M10 / M1214.82
2BC083097A3.268 - 3.8195.7874.6462.4024.6462 x M10 / M1217.07
2BC096109A3.780 - 4.2916.2995.1182.4025.1572 x M10 / M1219.37
2BC106120A4.173 - 4.7246.7725.5912.4025.6302 x M10 / M1221.73
2BC120135A4.724 - 5.3157.3626.1812.4026.2202 x M10 / M1224.44
2BC135151A5.315 - 5.9457.9136.8502.4026.7722 x M10 / M1227.09
Zenith Part No.Cable Ø range take (mm)Dimensions mmWeight (g)
WHDPFixing Hole Ø
2BC038048A38 - 48966861672 x M10 / M12250
2BC048058A48 - 581077861782 x M10 / M12297
2BC058070A58 - 701199161902 x M10 / M12357
2BC070083A70 - 83133104611042 x M10 / M12420
2BC083097A83 - 97147118611182 x M10 / M12484
2BC096109A96 - 109160130611312 x M10 / M12549
2BC106120A106 - 120172142611432 x M10 / M12616
2BC120135A120 - 135187157611582 x M10 / M12693
2BC135151A135 - 151201174611722 x M10 / M12768

Technical Illustration