- Home
- Cable Cleats
- Products
- Trefoil Application
- Endurance (SDSS-C)
Endurance (SDSS-C) Top opening standard duty stainless steel hinged cable cleat
We'd like to keep in touch
We have some exciting things in the pipeline - if you'd like to be the first to know please enter your email address below.
The Endurance cable cleats are metallic cable cleats which have been designed, constructed, and tested in accordance with the International Standard IEC 61914: Cable cleats for electrical installations, to ensure the securing and retention of cables, without sustaining damage to the cables.
The range is fabricated from 316L stainless steel in 24 sizes from 17 – 128mm.
The top opening is designed to fit more cleats installed side by side, whilst three M10 fixing clearance holes within each base, allow the versatility of installing with either one M10 bolt or two M10 bolts. This enables installation of the Endurance to a variety of mounting surfaces.
The hinge of the Endurance opens fully, allowing cables to be easily placed within the cable cleat, before closing and securing via the mouth piece bolt.
Liners come as standard which help to restrain the cable(s) within vertical applications. Where thermal elongation of cables occurs, the liner also provides a layer of protection between the cable sheath and the cable cleat during normal operation. This additional layer protects the cable from chafing on any mounting surface due to differential movements such as those found in marine and offshore applications. The liners also assist in the extra protection of cable(s) in the event of short circuit fault conditions. The standard liners supplied are classified as Low Smoke and Fume Zero Halogen (LSF0H), Phosphorus-free.
FEATURES
• Third party certification to IEC 61914
• 316L stainless steel
• 17 – 128mm in 24 sizes for trefoil formation / application
• Short circuit rating of 140kA peak fault
• Operating temperature -60°C to +60°C
• Standard Polymer Liners are classified as Low Smoke and Fume Zero Halogen (LSF0H), Phosphorus-free
• Combined single (M10) or two bolt (M10) fixing design
SHORT CIRCUIT TESTING TO IEC 91614 - CLAUSE 9.5 | ||
---|---|---|
TREFOIL INFORMATION | ||
One short circuit 300mm fixed cleat centres | Two short circuits 300mm fixed cleat centres | One short circuit 300mm fixed cleat centres |
0.1 sec | 0.1 sec | 1 sec |
140kA Peak | 135kA Peak | 80.1kA Peak |
63.6kA r.m.s | 61.4kA r.m.s | 38.5kA r.m.s |
SHORT CIRCUIT TESTING TO IEC 61914 - CLAUSE 9.5 | |||
TREFOIL FORMATION | |||
One short circuit 600mm fixed cleat centres | Two short circuits 600mm fixed cleat centres | One short circuit 600mm fixed cleat centres | Two short circuits 600mm fixed cleat centres |
0.1 sec | 0.1 sec | 1 sec | 1 sec |
109kA Peak | 109kA Peak | 75.1kA Peak | 74.8kA Peak |
51.9kA r.m.s | 51.9kA r.m.s | 35.7kA r.m.s | 35.6kA r.m.s |
Type | 6.1.3 Composite SDSS-C Standard Duty Stainless Steel |
Design Specification | IEC 61914 |
Temperature for permanent application | -60ºC to +60ºC IEC 61914 clause 6.2 |
Needle Flame Test | Pass -120 second flame application time IEC 61914 clause 10.0, 10.1, IEC 60695-11-5 |
Lateral Load Test | Refer to CMP Products, IEC 61914 clause 9.3 |
Axial Load Test | 0.6kN, IEC 61914 clause 9.4 |
Impact Resistance | Pass - Very Heavy IEC 61914 clause 6.3, 6.3.5, 9.2 |
Material | 316L Stainless Steel with Standard Polymer Liner Standard Polymer Liners are classified as Low Smoke and Fume Zero Halogen (LSF0H), Phosphorus-free |
Product Selection Table
ENDURANCE PART NO. | CABLE Ø RANGE TAKE (in) | DIMENSIONS (in) | WEIGHT (oz) | |||||
W | H | D | P | FIXING HOLE Ø | ||||
D1 | D2 | |||||||
SDSSC-017021 | 0.669-0.827 | 3.071 | 3.465 | 2.126 | 0.984 | 2 x M10 | 1 x M10 | 11.89 |
SDSSC-019024 | 0.748-0.945 | 3.110 | 3.504 | 2.126 | 0.984 | 2 x M10 | 1 x M10 | 12.31 |
SDSSC-023028 | 0.906-1.102 | 3.110 | 3.780 | 2.126 | 0.984 | 2 x M10 | 1 x M10 | 12.45 |
SDSSC--027032 | 1.063-1.260 | 3.228 | 4.094 | 2.126 | 0.984 | 2 x M10 | 1 x M10 | 12.59 |
SDSSC-030035 | 1.181-1.378 | 3.307 | 4.331 | 2.126 | 0.984 | 2 x M10 | 1 x M10 | 12.95 |
SDSSC-033038 | 1.299-1.496 | 3.819 | 4.606 | 2.126 | 0.984 | 2 x M10 | 1 x M10 | 13.37 |
SDSSC-036042 | 1.417-1.654 | 4.449 | 4.843 | 2.126 | 1.969 | 2 x M10 | 1 x M10 | 15.66 |
SDSSC-040046 | 1.575-1.811 | 4.528 | 5.157 | 2.126 | 1.969 | 2 x M10 | 1 x M10 | 16.12 |
SDSSC-044050 | 1.732-1.969 | 4.606 | 5.472 | 2.126 | 1.969 | 2 x M10 | 1 x M10 | 16.65 |
SDSSC-048055 | 1.890-2.165 | 4.843 | 5.827 | 2.126 | 1.969 | 2 x M10 | 1 x M10 | 17.25 |
SDSSC-051058 | 2.008-2.283 | 5.000 | 6.063 | 2.126 | 1.969 | 2 x M10 | 1 x M10 | 17.74 |
SDSSC-055062 | 2.165-2.441 | 5.787 | 6.339 | 2.126 | 2.953 | 2 x M10 | 1 x M10 | 19.75 |
SDSSC-059066 | 2.323-2.598 | 5.945 | 6.654 | 2.126 | 2.953 | 2 x M10 | 1 x M10 | 20.21 |
SDSSC-063070 | 2.48-2.756 | 6.063 | 6.969 | 2.126 | 2.953 | 2 x M10 | 1 x M10 | 20.71 |
SDSSC-067074 | 2.638-2.913 | 6.181 | 7.244 | 2.126 | 2.953 | 2 x M10 | 1 x M10 | 21.23 |
SDSSC-071078 | 2.795-3.071 | 6.339 | 7.559 | 2.126 | 2.953 | 2 x M10 | 1 x M10 | 21.62 |
SDSSC-074082 | 2.913-3.228 | 7.520 | 7.835 | 2.126 | 2.953 | 2 x M10 | 1 x M10 | 24.23 |
SDSSC-077085 | 3.031-3.346 | 7.559 | 8.071 | 2.126 | 2.953 | 2 x M10 | 1 x M10 | 24.80 |
SDSSC-082088 | 3.228-3.465 | 7.598 | 8.268 | 2.126 | 2.953 | 2 x M10 | 1 x M10 | 25.08 |
SDSSC-088096 | 3.465-3.780 | 8.031 | 8.858 | 2.126 | 2.953 | 2 x M10 | 1 x M10 | 25.86 |
SDSSC-096103 | 3.78-4.055 | 8.543 | 9.409 | 2.126 | 2.953 | 2 x M10 | 1 x M10 | 26.63 |
SDSSC-103111 | 4.055-4.370 | 9.291 | 10.000 | 2.126 | 2.953 | 2 x M10 | 1 x M10 | 30.09 |
SDSSC-111119 | 4.370-4.685 | 9.843 | 10.591 | 2.126 | 2.953 | 2 x M10 | 1 x M10 | 31.18 |
SDSSC-119128 | 4.685-5.039 | 10.512 | 11.220 | 2.126 | 2.953 | 2 x M10 | 1 x M10 | 32.28 |
ENDURANCE PART NO. | CABLE Ø RANGE TAKE (mm) | DIMENSIONS (mm) | WEIGHT (g) | |||||
W | H | D | P | FIXING HOLE Ø | ||||
D1 | D2 | |||||||
SDSSC-017021 | 17-21 | 78 | 88 | 54 | 25 | 2 x M10 | 1 x M10 | 337 |
SDSSC-019024 | 19-24 | 79 | 89 | 54 | 25 | 2 x M10 | 1 x M10 | 349 |
SDSSC-023028 | 23-28 | 79 | 96 | 54 | 25 | 2 x M10 | 1 x M10 | 353 |
SDSSC--027032 | 27-32 | 82 | 104 | 54 | 25 | 2 x M10 | 1 x M10 | 357 |
SDSSC-030035 | 30-35 | 84 | 110 | 54 | 25 | 2 x M10 | 1 x M10 | 367 |
SDSSC-033038 | 33-38 | 97 | 117 | 54 | 25 | 2 x M10 | 1 x M10 | 379 |
SDSSC-036042 | 36-42 | 113 | 123 | 54 | 50 | 2 x M10 | 1 x M10 | 444 |
SDSSC-040046 | 40-46 | 115 | 131 | 54 | 50 | 2 x M10 | 1 x M10 | 457 |
SDSSC-044050 | 44-50 | 117 | 139 | 54 | 50 | 2 x M10 | 1 x M10 | 472 |
SDSSC-048055 | 48-55 | 123 | 148 | 54 | 50 | 2 x M10 | 1 x M10 | 489 |
SDSSC-051058 | 51-58 | 127 | 154 | 54 | 50 | 2 x M10 | 1 x M10 | 503 |
SDSSC-055062 | 55-62 | 147 | 161 | 54 | 75 | 2 x M10 | 1 x M10 | 560 |
SDSSC-059066 | 59-66 | 151 | 169 | 54 | 75 | 2 x M10 | 1 x M10 | 573 |
SDSSC-063070 | 63-70 | 154 | 177 | 54 | 75 | 2 x M10 | 1 x M10 | 587 |
SDSSC-067074 | 67-74 | 157 | 184 | 54 | 75 | 2 x M10 | 1 x M10 | 602 |
SDSSC-071078 | 71-78 | 161 | 192 | 54 | 75 | 2 x M10 | 1 x M10 | 613 |
SDSSC-074082 | 74-82 | 191 | 199 | 54 | 75 | 2 x M10 | 1 x M10 | 687 |
SDSSC-077085 | 77-85 | 192 | 205 | 54 | 75 | 2 x M10 | 1 x M10 | 703 |
SDSSC-082088 | 82-88 | 193 | 210 | 54 | 75 | 2 x M10 | 1 x M10 | 711 |
SDSSC-088096 | 88-96 | 204 | 225 | 54 | 75 | 2 x M10 | 1 x M10 | 733 |
SDSSC-096103 | 96-103 | 217 | 239 | 54 | 75 | 2 x M10 | 1 x M10 | 755 |
SDSSC-103111 | 103-111 | 236 | 254 | 54 | 75 | 2 x M10 | 1 x M10 | 853 |
SDSSC-111119 | 111-119 | 250 | 269 | 54 | 75 | 2 x M10 | 1 x M10 | 884 |
SDSSC-119128 | 119-128 | 267 | 285 | 54 | 75 | 2 x M10 | 1 x M10 | 915 |