CXe | Ex eb, Ex ta | Explosive Atmosphere Cable Gland For Braid & Steel Tape Armoured Cables

Internationally Approved, Ex e, Explosive Atmosphere Cable Gland

• Metal-to-metal armour clamping
• Direct & remote installation
• Permanently crimped, low impedance earth termination
• Secure against self-loosening
• Controlled outer ‘load retention’ seal
• Unique OSTG prevents overtightening
• -60°C to +130°C
• Internationally marked, IECEx & ATEX
• EMC tested

Design Specification BS 6121:Part 1:1989, IEC 62444, EN 62444
Mechanical Classifications* Impact = Level 8, Retention = Class D
Enclosure Protection IK10 to IEC 62262 (20 joules) Brass & Stainless Steel only
Electrical Classifications * Category B (Category A when used with braid, tape or pliable wire armour cables)
ATEX Certificate CML 18ATEX1323X
Code of Protection II 2G, II 1D, Ex eb IIC Gb, Ex ta IIIC Da
Compliance Standards EN 60079-0,7,31
IECEx Certificate IECEx CML 18.0180X
Code of Protection Ex eb IIC Gb, Ex ta IIIC Da
Compliance Standards IEC 60079-0,7,31
EAC Certificate C-GB.AA87.B.00487
CCC Certificate 2020322313003285
INMETRO Approval TÜV 12.0617X
CCOE / PESO (India) Certificate P444949
RETIE Approval 03866
UkrSEPRO CU 19.0371X
SANS IA S-XPL21804 21.0009X
Marine Approvals LRS: 01/00172, DNV: TAE00000Y, ABS: 21-2090433-PDA, BV: 43180
Ingress Protection Rating ** IP66 as standard (IP67, IP68 available upon request)
Cable Gland Material Brass, Electroless Nickel Plated Brass, Aluminium, Stainless Steel
Seal Material CMP SOLO LSF Halogen Free Thermoset Elastomer
Cable Type Wire Braid Armour (e.g. SWB), Screened Flexible (EMC) Wire Braid (e.g. CY / SY), Pliable Wire
Armour (PWA), Steel Tape Armour (STA), Strip Armour (e.g. ASA)
Armour Clamping Detachable Armour Cone & AnyWay Universal Clamping Ring
Sealing Technique Unique CMP ‘LRS’ Outer Seal (Load Retention Seal)
Sealing Area(s) Cable Outer Sheath
Optional Accessories Locknuts, Earth Tags, Serrated Washers, Entry Thread Seals, Shrouds,Ingress Discs
Optional Installation Tools Spanners

Note: * Mechanical & Electrical Classifications applied as per IEC 62444 & EN 62444
** When CMP installation accessories are used. Refer to Maintaining a Seal for further information.
*** IP68 tested to a minimum depth of 30 metres for 12 hours, alternate depths / durations can be provided upon request

Jump to technical illustration   

Certificates

Click here to view Certificates

Product Selection Table

Click here to view how to order

Cable Gland SizeAvailable Entry Threads 'C' (Alternate Metric Thread Lengths Available)Cable
Bedding
Diameter
'A'
Overall
Cable
Diameter
'B'
Armour Range †
Grooved Cone (X)
Across
Flats 'D'
Across
Corners
'D'
Protrusion
Length 'F'
Combined Ordering Reference
(*Brass Metric)
ShroudCable
Gland
Weight
(Kgs)
MetricThread Length
(Metric) 'E'
MaxMaxMaxMinMaxMaxMaxSizeTypeOrdering
Suffix
20S16M200.590.340.240.520.010.040.941.041.8920S16CXE1RAPVC043.53
20SM200.590.460.370.630.010.040.941.041.8920SCXE1RAPVC043.53
20M200.590.550.490.820.020.041.201.321.8920CXE1RAPVC065.29
25SM250.590.790.550.870.020.051.481.632.2025SCXE1RAPVC097.76
25M250.590.790.721.030.020.051.481.632.2025CXE1RAPVC097.76
32M320.591.020.931.330.020.051.811.992.1332CXE1RAPVC1110.93
40M400.591.271.101.590.020.062.172.382.2840CXE1RAPVC1515.87
50SM500.591.501.391.840.020.062.362.602.4050SCXE1RAPVC1820.11
50M500.591.741.592.090.020.062.763.042.3650CXE1RAPVC2126.46
63SM630.591.971.802.340.020.062.953.252.9163SCXE1RAPVC2336.68
63M630.592.202.152.590.020.063.153.462.8063CXE1RAPVC2535.98
75SM750.592.442.322.830.020.063.543.903.3975SCXE1RAPVC2863.14
75M750.592.532.633.090.020.063.944.333.2375CXE1RAPVC3073.72
90M900.943.093.003.560.030.064.504.953.7490CXE1RAPVC32107.23
100M1000.943.583.393.990.030.064.845.333.74100CXE1RALSF33110.41
115M1150.943.864.004.340.030.065.255.784.23115CXE1RALSF34158.03
130M1300.944.534.344.850.030.066.006.604.33130CXE1RALSF35203.53
Dimensions displayed in inches unless otherwise stated
Cable Gland SizeAvailable Entry Threads 'C' (Alternate Metric Thread Lengths Available)Cable
Bedding
Diameter
'A'
Overall
Cable
Diameter
'B'
Armour Range †
Grooved Cone (X)
Across
Flats 'D'
Across
Corners
'D'
Protrusion
Length 'F'
Combined Ordering Reference
(*Brass Metric)
ShroudCable
Gland
Weight
(Kgs)
MetricThread Length
(Metric) 'E'
MaxMaxMaxMinMaxMaxMaxSizeTypeOrdering
Suffix
20S16M2015.08.76.113.10.31.024.026.448.020S16CXE1RAPVC040.10
20SM2015.011.79.515.90.31.024.026.448.020SCXE1RAPVC040.10
20M2015.014.012.520.90.41.030.533.648.020CXE1RAPVC060.15
25SM2515.020.014.022.00.41.237.541.356.025SCXE1RAPVC090.22
25M2515.020.018.226.20.41.237.541.356.025CXE1RAPVC090.22
32M3215.026.023.733.90.41.246.050.654.032CXE1RAPVC110.31
40M4015.032.227.940.40.41.655.060.558.040CXE1RAPVC150.45
50SM5015.038.235.246.70.41.660.066.061.050SCXE1RAPVC180.57
50M5015.044.140.453.00.61.670.177.160.050CXE1RAPVC210.75
63SM6315.050.045.659.40.61.675.082.574.063SCXE1RAPVC231.04
63M6315.056.054.665.80.61.680.088.071.063CXE1RAPVC251.02
75SM7515.062.059.072.00.61.690.099.086.075SCXE1RAPVC281.79
75M7515.064.266.778.40.61.6100.0110.082.075CXE1RAPVC302.09
90M9024.078.676.290.30.81.6114.3125.795.090CXE1RAPVC323.04
100M10024.091.086.1101.40.81.6123.0135.395.0100CXE1RALSF333.13
115M11524.098.0101.5110.20.81.6133.4146.7107.5115CXE1RALSF344.48
130M13024.0115.0110.2123.20.81.6152.4167.6110.0130CXE1RALSF355.77
Dimensions are displayed in millimeters unless otherwise stated

Technical Illustration

Additional Information

Dust Ignition Prevention

Combustible dust can be ignited by electrical equipment in several ways, for example by: - Surfaces of the equipment that are above the minimum ignition temperature of the dust concerned. - The temperature at which a type of dust ignites is a function of the properties of the dust;

Read more

Sources of Ignition

Ignition of a flammable mixture, or explosive atmosphere, may occur following an arc, spark or hot surface during the use of electrical as well as nonelectrical equipment. Arcs can result from the discharge of stored energy or from switching contacts.

Read more

Zone Definitions

Under IEC rules explosive atmospheres are divided into three zones, or areas of risk (in the case of gas and vapour), and IEC 60079-10 recognises these as Zone 0, Zone 1 and Zone 2.

Read more

Visit our Knowledge Base for technical expertise and advice, gathered over CMP's 60+ years' experience in the art of terminating cable glands.

Sign up now