TSZe EMC Ex | Ex eb, Ex ta | Strain Relief Metal Cable Gland For all Types of Braided / Screened Cables

  • Designed for superior EMC performance
  • 360° contact around screen circumference
  • 3rd party EMC performance tested to EN 55032
  • Approved to the latest editions of IEC/EN 60079
  • Internationally marked IECEx and ATEX
  • Suitable for intrinsically safe (Ex i) circuits
  • Finger-locking seal provides superior cable retention and strain relief
  • 3rd party certified to IEC/EN 62444
  • Widest cable range take on the market
  • O-ring interface seal included as standard
  • Transit disc or IP68, IP69 and IP69K rated IP plug options available
  • Product supplied in nickel-plated brass, or stainless steel on request
Design Specification IEC 62444, EN 62444 (EN Metric only)
Mechanical Classifications* Impact = Level 6, Cable Anchorage = Type A
Enclosure Protection IK08 to IEC 62262 (7 joules)
Ingress Protection Rating ** IP66, IP67, IP68**, IP69 & IP69K
Cable Gland Material Nickel-plated brass, Stainless Steel (option)
Seal Material CMP SOLO LSF Halogen-free Thermoset Elastomer
Cable Type Screened or Braided
Sealing Technique CMP Unique finger-locking type seal
Sealing Area(s) Cable Outer Sheath
ATEX Certificate CML 19ATEX3185X
Compliance Standards EN 60079-0,7,31
Code of Protection II 2G 1D, Ex eb IIC Gb, Ex ta IIIC Da
IECEx Certificate IECEx CML 19.0062X
Compliance Standards IEC 60079-0,7,31
Code of Protection Ex eb IIC Gb, Ex ta IIIC Da
EAC Certificate Code of Protection 1Ex e llC Gb X, Ex ta lllC Da X
SANS IA S-XPL21804 21.0014X
CCC Certificate 2020322313003450
Marine Approvals TAE000000Y

* Mechanical classifications applied as per IEC/EN 62444
** IP68 tested to 300 kPa for 16 hours (equivalent to 30 metres water depth)

Jump to technical illustration   


Click here to view Certificates

Click here to view how to order

Dual Seal Available Entry Threads 'C'Overall Cable Diameter 'A'Across Flats 'D'Across Corners 'D'Protrusion Length 'B'
Cable Gland OnlyCable Gland with LocknutMetricThread Length (Metric) 'E'Long Thread Length (Metric) 'E'NPTThread Length (NPT) 'E'MinMaxMaxMax
40DTSZE1TA540DTSZE2TN5M408.015.01 1⁄4”
50DTSZE1TA550DTSZE2TN5M509.015.01 1⁄2”
Standard SealAvailable Entry Threads 'C'Overall Cable Diameter 'A'Across Flats 'D'Across Corners 'D'Protrusion Length 'B'
Cable Gland OnlyCable Gland with LocknutMetricThread Length (Metric) 'E'Long Thread Length (Metric) 'E'NPTThread Length (NPT) 'E'MinMaxMaxMax
40STSZE1TA540STSZE2TN5M408.015.01 1⁄4”
40TSZE1TA540TSZE2TN5M408.015.01 1⁄4”
50STSZE1TA550STSZE2TN5M509.015.01 1⁄2”
50TSZE1TA550TSZE2TN5M509.015.01 1⁄2”
For NPT threads add a ‘T’ to the suffix e.g. 16DTSZE1TA52T (3⁄8” NPT)
For long metric threads add an ‘L’ to the suffix e.g. 16DTSZE1TA5L (M16, 12mm length of entry thread).
Dimensions are displayed in millimetres unless otherwise stated

Technical Illustration

Additional Information

Form of Protection Ex ‘i’

Intrinsically Safe Enclosure / System Type ‘i’ (e.g. IEC 60079-11): Intrinsically Safe Equipment (Sub grouped into Ex ‘ia’, Ex ‘ib’, and Ex ‘ic’) incorporates circuits which, due to their low spark energy potential, are not capable of igniting an explosive mixture. Ex ‘ib’ equipment is designed to be safe under one fault condition and can be used in Zone 1 explosive atmospheres. Ex ‘ia’ equipment is designed to be safe under two fault conditions and can be used in Zone 0 explosive atmospheres. Ex ‘ic’ equipment is designed to be safe in normal operation, without any faults, and can be used only in Zone 2 explosive atmospheres. The recent introduction of Ex ‘ic’, according to IEC 60079-11, for Zone 2 applications co-incides with the removal of protection method ‘nL’ from IEC 60079-15.

Read more

Form of Protection Ex ‘m’

Encapsulation Type ‘m’ (e.g. IEC 60079-5): Encapsulation of arcing and sparking components or equipment in a fashion which ensures that there is no exposure to explosive mixtures which may be present, and the surface temperature is controlled under normal and fault conditions, thus preventing ignition from occurring.

Read more

Form of Protection Ex ‘n’

Enclosures with protection Type ‘n’ (e.g. IEC 60079-15): Permitted only in areas where the likelihood of a flammable atmosphere is remote (i.e. Zone 2 Explosive Atmospheres), EPL Gc, Type ‘n’ Equipment was historically divided into a number of different sub-forms.

Read more

Visit our Knowledge Base for technical expertise and advice, gathered over CMP's 60+ years' experience in the art of terminating cable glands.

Sign up now