B323 | Insulated Cable Gland For all types of Steel & Aluminium Wire Armoured Cables

Insulated Industrial Cable Gland

• High quality durable materials
• Robust, heavy duty insulated design
• Metal-to-metal armour clamping
• Permanently crimped, low impedance earth termination
• Secure against self-loosening
• Direct & remote installation
• Enables zoning of earthed neutral systems
• Eliminates circulating currents
• Third party short circuit tested
• Controlled outer ‘load retention’ seal
• Unique OSTG prevents overtightening
• -60°C to +130°C
• EMC tested

Note: Earth Tags can only be fitted to the B323 & A323 ZEN gland types.

The Symmetrical Fault Current (kA) rating for 1 second applicable to the Cast Integral Earth Lug featured in the B347 and A347 products are as follows:
• 26.0 kA for Cable Gland sizes up to 40
• 43.0 kA for Cable Gland sizes 50S and above

Please refer to the CMP CW CIEL product page for dimensional details of the Cast Integral Earth Lug feature included in the B347 and A347 designs.

Aluminium version available for AWA cables. When ordering please substitute letter B in B323 & B347 with letter A.

For under / oversized armour wires click here

Type B323
Design Specification BS 6121:Part 1:1989, IEC 62444, EN 62444, GDCD 190
Mechanical Classifications* Impact = Level 8, Retention = Class D
Enclosure Protection IK10 to IEC 62262 (20 joules) Brass & Stainless Steel only
Electrical Classifications* Category B (B323)
GOST R Certificate POCC.GB.HA46.H00140
Ingress Protection Rating ** IP66
Cable Gland Material Brass, Nickel Plated Brass, Aluminium, Stainless Steel
Seal Material CMP Thermoset Rubber
Cable Type Single Wire Armour (SWA), Aluminium Wire Armour (AWA)
Armour Clamping Three Part Armour Lock With AnyWay Universal Clamping Ring
Sealing Technique Unique CMP ‘LRS’ TM Outer Seal
(Load Retention Seal)
Sealing Area(s) Cable Outer Sheath
Optional Accessories Locknuts, Earth Tags, Serrated Washers, Entry Thread Seals, Shrouds,Ingress Discs
Optional Installation Tools Spanners, Armour Former Tool

Note : * Mechanical & Electrical Classifications applied as per IEC 62444 & EN 62444
** Refer to Maintaining a Seal for further information on Ingress Protection Ratings

Jump to technical illustration   


Click here to view Certificates

Product Selection Table

Click here to view how to order

Cable Gland SizeClearance Hole Diameter "C"Cable Bedding Diameter "A"Overall Cable Diameter "B"Armour RangeAcross Flats "D"Across Corners "D"Protrusion Length "F"Ordering Reference (Brass Metric)Shroud (B323)Cable Gland Weight (Ozs)
MaxMinMaxMinMaxWith CIEL Lug (B323)
Dimensions in millimeters unless otherwise stated
Cable Gland SizeClearance Hole Diameter "C"Cable Bedding Diameter "A"Overall Cable Diameter "B"Armour RangeAcross Flats "D"Across Corners "D"Protrusion Length "F"Ordering Reference (Brass Metric)Shroud (B323)Cable Gland Weight (kg)
MaxMinMaxMinMaxWith CIEL Lug (B323)
32M3226.223.733.91.624650.6 82.532B3231RAPVC110.47
Dimensions displayed in millimeters unless otherwise stated

Technical Illustration

Additional Information

ZEN Insulated Cable Glands

ZEN is available with an insulating arrangement to ensure that no contact is made between the earth circuit carried through the cable armour and the electrical enclosure which the cable enters. This isolation of the cable armour at one end of the cable is sometimes referred to as single point earthing. The ZEN range from CMP however allows more than a single point of earthing and delivering optimum safety.

Read more

Visit our Knowledge Base for technical expertise and advice, gathered over CMP's 60+ years' experience in the art of terminating cable glands.

Sign up now