Want to discuss this product with one of the CMP Technical Team? Call one of our team now on +44 191 265 7411

C2KGP | Industrial Cable Gland For all types of Armoured Cables

Description

Technical

Single Seal Industrial Cable Gland

• High quality durable materials
• Robust, heavy duty design
• Metal-to-metal armour clamping
• Direct & remote installation
• Controlled outer ‘load retention’ seal
• Unique OSTG prevents overtightening
• Integral protected deluge seal
• -60°C to +130°C
• Superior EMC performance

Note: † Grooved Cone (X) is predominantly used for Wire Braid (e.g. GSWB, TCWB), Steel Tape Armour (STA, DSTA) and Aluminium Strip Armour (ASA) but is also suitable for Single Wire Armour (SWA), Aluminium Wire Armour (AWA) and Pliable Wire Armour (PWA) if the range is outside that of the Stepped Cone (W).

Note: Grooved Cone (X) dimensions shown in the Cable Gland Selection Table below are for a double wire strand of braid armour cables. Tapes can also be doubled over. For cables that have only a single layer of armour such as SWA the clamping range should be used as shown in the table below.

Stepped (W) Cone is suitable for Single Wire Armour (SWA), or Aluminium Wire Armour (AWA) cables.

For under / oversized armour wires click here

Design Specification	BS 6121:Part 1:1989, IEC 62444, EN 62444
Mechanical Classifications *	Impact = Level 8, Retention = Class D
Enclosure Protection	IK10 to IEC 62262 (20 joules) Brass & Stainless Steel only
Electrical Classifications *	Category B (Category A when used with braid, tape or pliable wire armour cables)
GOST R Certificate	POCC.GB.HA46.H00140
Marine Approvals	LRS: 01/00171
Ingress Protection Rating **	IP66, IP67 & IP68
Deluge Protection Compliance	DTS01 : 91
Cable Gland Material	Brass, Electroless Nickel Plated Brass, Stainless Steel, Aluminium
Seal Material	CMP Thermoset Rubber
Cable Type	Single Wire Armour (SWA), Aluminium Wire Armour (AWA), Steel Tape Armour (STA), Aluminium Strip Armour (ASA), Wire Braid Armour, Screened Flexible (EMC) Wire Braid (e.g. CY / SY), Pliable Wire Armour (PWA)
Armour Clamping	Reversible Armour Cone & AnyWay Universal Clamping Ring
Sealing Technique	Unique CMP ‘LRS’ Outer Seal (Load Retention Seal)
Sealing Area(s)	Cable Outer Sheath
Optional Accessories	Locknuts, Earth Tags, Serrated Washers, Entry Thread Seals, Shrouds,Ingress Discs
Optional Installation Tools	Spanners, Armour Former Tool

Note : * Mechanical & Electrical Classifications applied as per IEC 62444 & EN 62444
** Refer to Maintaining a Seal for further information on Ingress Protection Ratings

Jump to technical illustration

Certificates

Product Selection Table

Click here to view how to order

Showing:

Cable Gland Size	Available Entry Threads 'C' (Alternate Metric Thread Lengths Available)		Cable Bedding Diameter 'A'	Overall Cable Diameter 'B'		Armour Range				Across Flats 'D'	Across Corners 'D'	Protrusion Length 'F'	Combined Ordering Reference (*Brass Metric)			Shroud	Cable Gland Weight (Ozs)
			Cable Bedding Diameter 'A'	Overall Cable Diameter 'B'		Grooved Cone (X)		Stepped Cone (W)		Across Flats 'D'	Across Corners 'D'		Combined Ordering Reference (*Brass Metric)
	Metric	Thread Length (Metric) 'E'	Max	Max	Max	Min	Max	Max	Max	Max	Max		Size	Type	Ordering Suffix
20S16	M20	0.39	0.34	0.24	0.52	0.01	0.04	0.03	0.05	1.20	1.32	2.56	20S16	C2KGP	1RA	PVC06	8.11
20S	M20	0.39	0.46	0.37	0.63	0.01	0.04	0.03	0.05	1.20	1.32	2.44	20S	C2KGP	1RA	PVC06	7.76
20	M20	0.39	0.55	0.49	0.82	0.02	0.04	0.03	0.05	1.20	1.32	2.48	20	C2KGP	1RA	PVC06	7.76
25S	M25	0.39	0.79	0.55	0.87	0.02	0.05	0.05	0.06	1.48	1.63	2.74	25S	C2KGP	1RA	PVC09	12.35
25	M25	0.39	0.79	0.72	1.03	0.02	0.05	0.05	0.06	1.48	1.63	2.74	25	C2KGP	1RA	PVC09	12.35
32	M32	0.39	1.04	0.93	1.33	0.02	0.05	0.06	0.08	1.81	1.99	2.95	32	C2KGP	1RA	PVC11	19.40
40	M40	0.59	1.27	1.10	1.59	0.02	0.06	0.06	0.08	2.17	2.38	2.95	40	C2KGP	1RA	PVC15	26.46
50S	M50	0.59	1.50	1.39	1.84	0.02	0.06	0.08	0.10	2.36	2.60	3.03	50S	C2KGP	1RA	PVC18	30.34
50	M50	0.59	1.74	1.59	2.09	0.02	0.06	0.08	0.10	2.76	3.04	3.03	50	C2KGP	1RA	PVC21	39.86
63S	M63	0.59	1.97	1.80	2.34	0.02	0.06	0.08	0.10	2.95	3.25	3.15	63S	C2KGP	1RA	PVC23	46.91
63	M63	0.59	2.20	2.15	2.59	0.02	0.06	0.08	0.10	3.15	3.46	3.15	63	C2KGP	1RA	PVC25	47.27
75S	M75	0.59	2.44	2.32	2.83	0.02	0.06	0.08	0.10	3.54	3.90	3.43	75S	C2KGP	1RA	PVC28	71.25
75	M75	0.59	2.68	2.63	3.09	0.02	0.06	0.10	0.12	3.94	3.94	3.46	75	C2KGP	1RA	PVC30	87.48
90	M90	0.94	3.15	3.00	3.56	0.03	0.06	0.12	0.16	4.53	4.53	4.02	90	C2KGP	1RA	PVC32	124.16
100	M100	0.94	3.58	3.39	3.99	0.03	0.06	0.12	0.16	5.00	5.00	4.49	100	C2KGP	1RA	LSF33	161.20
115	M115	0.94	3.86	4.00	4.34	0.03	0.06	0.12	0.16	5.25	5.25	4.49	115	C2KGP	1RA	LSF34	229.28
130	M130	0.94	4.53	4.34	4.85	0.03	0.06	0.12	0.16	6.00	6.00	4.49	130	C2KGP	1RA	LSF35	299.83
Dimensions displayed in inches unless otherwise stated

Cable Gland Size	Available Entry Threads 'C' (Alternate Metric Thread Lengths Available)		Cable Bedding Diameter 'A'	Overall Cable Diameter 'B'		Armour Range				Across Flats 'D'	Across Corners 'D'	Protrusion Length 'F'	Combined Ordering Reference (*Brass Metric)			Shroud	Cable Gland Weight (Kgs)
			Cable Bedding Diameter 'A'	Overall Cable Diameter 'B'		Grooved Cone (X)		Stepped Cone (W)		Across Flats 'D'	Across Corners 'D'		Combined Ordering Reference (*Brass Metric)
	Metric	Thread Length (Metric) 'E'	Max	Max	Max	Min	Max	Max	Max	Max	Max		Size	Type	Ordering Suffix
20S16	M20	10.0	8.7	6.1	13.1	0.3	1.0	0.8	1.25	30.5	33.6	65.0	20S16	C2KGP	1RA	PVC06	0.23
20S	M20	10.0	11.7	9.5	15.9	0.3	1.0	0.8	1.25	30.5	33.6	62.0	20S	C2KGP	1RA	PVC06	0.22
20	M20	10.0	14.0	12.5	20.9	0.4	1.0	0.8	1.25	30.5	33.6	63.0	20	C2KGP	1RA	PVC06	0.22
25S	M25	10.0	20.0	14.0	22.0	0.4	1.2	1.25	1.6	37.5	41.3	69.5	25S	C2KGP	1RA	PVC09	0.35
25	M25	10.0	20.0	18.2	26.2	0.4	1.2	1.25	1.6	37.5	41.3	69.5	25	C2KGP	1RA	PVC09	0.35
32	M32	10.0	26.3	23.7	33.9	0.4	1.2	1.6	2.0	46.0	50.6	75.0	32	C2KGP	1RA	PVC11	0.55
40	M40	15.0	32.2	27.9	40.4	0.4	1.6	1.6	2.0	55.0	60.5	75.0	40	C2KGP	1RA	PVC15	0.75
50S	M50	15.0	38.2	35.2	46.7	0.4	1.6	2.0	2.5	60.0	66.0	77.0	50S	C2KGP	1RA	PVC18	0.86
50	M50	15.0	44.1	40.4	53.0	0.6	1.6	2.0	2.5	70.1	77.1	77.0	50	C2KGP	1RA	PVC21	1.13
63S	M63	15.0	50.0	45.6	59.4	0.6	1.6	2.0	2.5	75.0	82.5	80.0	63S	C2KGP	1RA	PVC23	1.33
63	M63	15.0	56.0	54.6	65.8	0.6	1.6	2.0	2.5	80.0	88.0	80.0	63	C2KGP	1RA	PVC25	1.34
75S	M75	15.0	62.0	59.0	72.0	0.6	1.6	2.0	2.5	90.0	99.0	87.0	75S	C2KGP	1RA	PVC28	2.02
75	M75	15.0	68.0	66.7	78.4	0.6	1.6	2.5	3.0	100.0	100.0	88.0	75	C2KGP	1RA	PVC30	2.48
90	M90	24.0	80.0	76.2	90.3	0.8	1.6	3.15	4.0	115.0	126.5	102.0	90	C2KGP	1RA	PVC32	3.52
100	M100	24.0	91.0	86.1	101.4	0.8	1.6	3.15	4.0	127.0	139.7	114.0	114	C2KGP	1RA	LSF33	4.57
115	M115	24.0	98.0	101.5	110.2	0.8	1.6	3.15	4.0	133.4	133.4	146.7	114	C2KGP	1RA	LSF34	6.50
130	M130	24.0	115.0	110.2	123.2	0.8	1.6	3.15	4.0	152.4	152.4	167.6	114	C2KGP	1RA	LSF35	8.50
Dimensions displayed in millimeters unless otherwise stated

Technical Illustration

Additional Information

CMP Ingress Protection Testing

Some CMP cable gland types have been tested to IP66, whilst other types have been tested to IP66, IP67 & IP68, to an equivalent depth of up to 60 metres for a duration of two weeks. For manufacturers to claim an IP68 protection level it is important that they include both the depth of water and time duration of the test conducted; otherwise the rating would be incomplete and meaningless.

DIN 40050 Definitions

The following page provides an explanation of ingress protection codes according to DIN 40050-9 (liquids) and IEC 60529 (dusts).

IEC 60529 Definitions

The following page provides an explanation of ingress protection codes according to IEC 60529.

Visit our Knowledge Base for technical expertise and advice, gathered over CMP's 60+ years' experience in the art of terminating cable glands.

Search

Product Finder

Cleat Specification Tool