- Home
- Cable Glands
- Products
- Industrial / General Purpose
- E1UHT | High Temperature Industrial Cable Gland
E1UHT | High Temperature Industrial Cable Gland For all types of Armoured cables
We'd like to keep in touch
We have some exciting things in the pipeline - if you'd like to be the first to know please enter your email address below.
High Temperature, Double Seal Industrial Cable Gland
• -20°C to 200°C high temperature ThermIn seals
• Metal-to-metal armour clamping
• Direct & remote installation
• Permanently crimped, low impedance earth termination
• Secure against self-loosening
• Displacement type inner seal
• Controlled outer ‘load retention’ seal
• Unique OSTG prevents overtightening
• Deluge protection option
• EMC tested
For under / oversized armour wires click here
Design Specification | BS 6121:Part 1:1989, IEC 62444, EN 62444 |
Mechanical Classifications* | Impact = Level 8, Retention = Class D |
Enclosure Protection | IK10 to IEC 62262 (20 joules) Brass & Stainless Steel only |
Electrical Classifications* | Category B (Category A when used with braid, tape or pliable wire armour cables) |
Continuous Operating Temperature | -20°C to +200°C |
Ingress Protection Rating ** | IP66 as standard (IP67, IP68 available upon request) |
Cable Gland Material | Brass, Electroless Nickel Plated Brass, Aluminium |
Seal Material | CMP Thermoset Rubber |
Cable Type | Single Wire Armour (SWA), Aluminium Wire Armour (AWA), Pliable Wire Armour (PWA), Steel Tape Armour (STA), Wire Braid Armour, Aluminium Strip Armour (ASA), Screened Flexible (EMC) Wire Braid (e.g. CY / SY), Armoured & Jacketed |
Armour Clamping | Reversible Armour Cone & AnyWay Universal Clamping Ring |
Sealing Technique | CMP Inner Displacement Seal & Unique CMP ‘LRS’ TM Outer Load Retention Seal |
Sealing Area(s) | Cable Inner Bedding & Outer Cable Sheath |
Optional Accessories | Locknuts, Earth Tags, Serrated Washers, Entry Thread Seals, Shrouds,Ingress Discs |
Optional Installation Tools | Spanners, Armour Former Tool |
Note : * Mechanical & Electrical Classifications applied as per IEC 62444 & EN 6244
** Refer to Maintaining a Seal for further information on Ingress Protection Ratings
Certificates
Product Selection Table
Click here to view how to order
Cable Gland Size | Available Entry Threads 'C' (Alternate Metric Thread Lengths Available) | Cable Bedding Diameter 'A' | Overall Cable Diameter 'B' | Armour Range | Across Flats 'D' | Across Corners 'D' | Protrusion Length 'F' | Combined Ordering Reference (*Brass Metric) | Shroud | Cable Gland Weight (Ozs) |
|||||||||||
Standard | Option | Grooved Cone (X) | Stepped Cone (W) | ||||||||||||||||||
Metric | Thread Length (Metric) 'E' | NPT | Thread Length (NPT) 'E' | NPT | Min | Max | Min | Max | Min | Max | Min | Max | Max | Max | Size | Type | Ordering Suffix |
||||
20S16 | M20 | 0.39 | ½' | 0.78 | ¾" | 0.12 | 0.34 | 0.24 | 0.52 | 0.01 | 0.04 | 0.03 | 0.05 | 0.94 | 1.04 | 2.85 | 20S16 | E1UHT | 1RA | PVC04 | 5.75 |
20S | M20 | 0.39 | ½' | 0.78 | ¾" | 0.24 | 0.46 | 0.37 | 0.63 | 0.01 | 0.04 | 0.03 | 0.05 | 0.94 | 1.04 | 2.76 | 20S | E1UHT | 1RA | PVC04 | 5.29 |
20 | M20 | 0.39 | ½' | 0.78 | ¾" | 0.26 | 0.55 | 0.49 | 0.82 | 0.02 | 0.04 | 0.03 | 0.05 | 1.20 | 1.32 | 2.87 | 20 | E1UHT | 1RA | PVC06 | 7.05 |
25S | M25 | 0.39 | ¾' | 0.80 | 1" | 0.44 | 0.78 | 0.55 | 0.87 | 0.02 | 0.05 | 0.05 | 0.06 | 1.48 | 1.63 | 3.50 | 25S | E1UHT | 1RA | PVC09 | 11.64 |
25 | M25 | 0.39 | ¾' | 0.80 | 1" | 0.44 | 0.78 | 0.72 | 1.03 | 0.02 | 0.05 | 0.05 | 0.06 | 1.48 | 1.63 | 3.50 | 25 | E1UHT | 1RA | PVC09 | 11.64 |
32 | M32 | 0.39 | 1' | 0.98 | 1 ¼" | 0.67 | 1.03 | 0.93 | 1.33 | 0.02 | 0.05 | 0.06 | 0.08 | 1.81 | 1.99 | 3.39 | 32 | E1UHT | 1RA | PVC11 | 15.17 |
40 | M40 | 0.59 | 1 ¼' | 1.01 | 1 ½" | 0.87 | 1.26 | 1.10 | 1.59 | 0.02 | 0.06 | 0.06 | 0.08 | 2.17 | 2.38 | 3.54 | 40 | E1UHT | 1RA | PVC15 | 21.87 |
50S | M50 | 0.59 | 1 ½' | 1.03 | 2" | 1.16 | 1.50 | 1.39 | 1.84 | 0.02 | 0.06 | 0.08 | 0.10 | 2.36 | 2.60 | 3.58 | 50S | E1UHT | 1RA | PVC18 | 26.46 |
50 | M50 | 0.59 | 2' | 1.06 | 2 ½" | 1.40 | 1.73 | 1.59 | 2.09 | 0.02 | 0.06 | 0.08 | 0.10 | 2.76 | 3.04 | 3.74 | 50 | E1UHT | 1RA | PVC21 | 33.51 |
63S | M63 | 0.59 | 2' | 1.06 | 2 ½" | 1.58 | 1.96 | 1.80 | 2.34 | 0.02 | 0.06 | 0.08 | 0.10 | 2.95 | 3.25 | 4.02 | 63S | E1UHT | 1RA | PVC23 | 47.27 |
63 | M63 | 0.59 | 2 ½' | 1.57 | 3" | 1.86 | 2.20 | 2.15 | 2.59 | 0.02 | 0.06 | 0.08 | 0.10 | 3.15 | 3.46 | 4.09 | 63 | E1UHT | 1RA | PVC25 | 47.27 |
75S | M75 | 0.59 | 2 ½' | 1.57 | 3" | 2.08 | 2.44 | 2.32 | 2.83 | 0.02 | 0.06 | 0.08 | 0.10 | 3.54 | 3.90 | 4.53 | 75S | E1UHT | 1RA | PVC28 | 74.43 |
75 | M75 | 0.59 | 3' | 1.63 | 3 ½" | 2.33 | 2.67 | 2.63 | 3.09 | 0.02 | 0.06 | 0.10 | 0.12 | 3.94 | 4.33 | 4.61 | 75 | E1UHT | 1RA | PVC30 | 85.36 |
90 | M90 | 0.94 | 3 ½' | 1.69 | 4" | 2.62 | 3.09 | 3.00 | 3.56 | 0.03 | 0.06 | 0.12 | 0.16 | 4.50 | 4.94 | 5.79 | 90 | E1UHT | 1RA | PVC32 | 148.50 |
100 | M100 | 0.94 | 3 ½' | 1.69 | 4" | 2.99 | 3.58 | 3.39 | 3.99 | 0.03 | 0.06 | 0.12 | 0.16 | 4.84 | 5.33 | 5.51 | 100 | E1UHT | 1RA | LSF33 | 156.97 |
115 | M115 | 0.94 | 4" | 1.73 | 5" | 3.39 | 3.85 | 4.00 | 4.34 | 0.03 | 0.06 | 0.12 | 0.16 | 5.25 | 5.78 | 6.38 | 115 | E1UHT | 1RA | LSF34 | 218.35 |
130 | M130 | 0.94 | 5" | 1.84 | - | 3.82 | 4.52 | 4.34 | 4.85 | 0.03 | 0.06 | 0.12 | 0.16 | 6.00 | 6.32 | 6.85 | 130 | E1UHT | 1RA | LSF35 | 294.19 |
Dimensions displayed in inches unless otherwise stated |
Cable Gland Size | Available Entry Threads 'C' (Alternate Metric Thread Lengths Available) | Cable Bedding Diameter 'A' | Overall Cable Diameter 'B' | Armour Range | Across Flats 'D' | Across Corners 'D' | Protrusion Length 'F' | Combined Ordering Reference (*Brass Metric) | Shroud | Cable Gland Weight (Kgs) |
|||||||||||
Standard | Option | Grooved Cone (X) | Stepped Cone (W) | ||||||||||||||||||
Metric | Thread Length (Metric) 'E' | NPT | Thread Length (NPT) 'E' | NPT | Min | Max | Min | Max | Min | Max | Min | Max | Max | Max | Size | Type | Ordering Suffix |
||||
20S16 | M20 | 10.0 | ½' | 19.9 | ¾" | 3.1 | 8.6 | 6.1 | 13.1 | 0.3 | 1.0 | 0.8 | 1.25 | 24.0 | 26.4 | 72.5 | 20S16 | E1UHT | 1RA | PVC04 | 0.16 |
20S | M20 | 10.0 | ½' | 19.9 | ¾" | 6.1 | 11.6 | 9.5 | 15.9 | 0.3 | 1.0 | 0.8 | 1.25 | 24.0 | 26.4 | 70.0 | 20S | E1UHT | 1RA | PVC04 | 0.15 |
20 | M20 | 10.0 | ½' | 19.9 | ¾" | 6.5 | 13.9 | 12.5 | 20.9 | 0.4 | 1.0 | 0.8 | 1.25 | 30.5 | 33.6 | 73.0 | 20 | E1UHT | 1RA | PVC06 | 0.20 |
25S | M25 | 10.0 | ¾' | 20.2 | 1" | 11.1 | 19.9 | 14.0 | 22.0 | 0.4 | 1.2 | 1.25 | 1.6 | 37.5 | 41.3 | 89.0 | 25S | E1UHT | 1RA | PVC09 | 0.33 |
25 | M25 | 10.0 | ¾' | 20.2 | 1" | 11.1 | 19.9 | 18.2 | 26.2 | 0.4 | 1.2 | 1.25 | 1.6 | 37.5 | 41.3 | 89.0 | 25 | E1UHT | 1RA | PVC09 | 0.33 |
32 | M32 | 10.0 | 1' | 25.0 | 1 ¼" | 17.0 | 26.2 | 23.7 | 33.9 | 0.4 | 1.2 | 1.6 | 2.0 | 46.0 | 50.6 | 86.0 | 32 | E1UHT | 1RA | PVC11 | 0.43 |
40 | M40 | 15.0 | 1 ¼' | 25.6 | 1 ½" | 22.0 | 32.1 | 27.9 | 40.4 | 0.4 | 1.6 | 1.6 | 2.0 | 55.0 | 60.5 | 90.0 | 40 | E1UHT | 1RA | PVC15 | 0.62 |
50S | M50 | 15.0 | 1 ½' | 26.1 | 2" | 29.5 | 38.1 | 35.2 | 46.7 | 0.4 | 1.6 | 2.0 | 2.5 | 60.0 | 66.0 | 91.0 | 50S | E1UHT | 1RA | PVC18 | 0.75 |
50 | M50 | 15.0 | 2' | 26.9 | 2 ½" | 35.6 | 44.0 | 40.4 | 53.0 | 0.6 | 1.6 | 2.0 | 2.5 | 70.1 | 77.1 | 95.0 | 50 | E1UHT | 1RA | PVC21 | 0.95 |
63S | M63 | 15.0 | 2' | 26.9 | 2 ½" | 40.1 | 49.9 | 45.6 | 59.4 | 0.6 | 1.6 | 2.0 | 2.5 | 75.0 | 82.5 | 102.0 | 63S | E1UHT | 1RA | PVC23 | 1.34 |
63 | M63 | 15.0 | 2 ½' | 39.9 | 3" | 47.2 | 55.9 | 54.6 | 65.8 | 0.6 | 1.6 | 2.0 | 2.5 | 80.0 | 88.0 | 104.0 | 63 | E1UHT | 1RA | PVC25 | 1.34 |
75S | M75 | 15.0 | 2 ½' | 39.9 | 3" | 52.8 | 61.9 | 59.0 | 72.0 | 0.6 | 1.6 | 2.0 | 2.5 | 90.0 | 99.0 | 115.0 | 75S | E1UHT | 1RA | PVC28 | 2.11 |
75 | M75 | 15.0 | 3' | 41.5 | 3 ½" | 59.1 | 67.9 | 66.7 | 78.4 | 0.6 | 1.6 | 2.5 | 3.0 | 100.0 | 110.0 | 117.0 | 75 | E1UHT | 1RA | PVC30 | 2.42 |
90 | M90 | 24.0 | 3 ½' | 42.8 | 4" | 66.6 | 78.6 | 76.2 | 90.3 | 0.8 | 1.6 | 3.15 | 4.0 | 114.3 | 125.4 | 147.0 | 90 | E1UHT | 1RA | PVC32 | 4.21 |
100 | M100 | 24.0 | 3 ½' | 42.8 | 4" | 76.0 | 90.9 | 86.1 | 101.4 | 0.8 | 1.6 | 3.15 | 4.0 | 123.0 | 135.3 | 140.0 | 100 | E1UHT | 1RA | LSF33 | 4.45 |
115 | M115 | 24.0 | 4" | 44.0 | 5" | 86.0 | 97.9 | 101.5 | 110.2 | 0.8 | 1.6 | 3.15 | 4.0 | 133.4 | 146.7 | 162.0 | 115 | E1UHT | 1RA | LSF34 | 6.19 |
130 | M130 | 24.0 | 5" | 46.8 | - | 97.0 | 114.9 | 110.2 | 123.2 | 0.8 | 1.6 | 3.15 | 4.0 | 152.4 | 160.6 | 174.0 | 130 | E1UHT | 1RA | LSF35 | 8.34 |
Dimensions displayed in millimeters unless otherwise stated |
Protection by Enclosure Against Mechanical Impact
It is critically important that enclosures afford a level of mechanical protection relevant to the area of installation that provides optimum electrical and operational safety. The international standard IEC 62262 covering ‘Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK Code)’ outlines the requirements for testing and rating of enclosures of different materials, so that careful selection to suit the application can be achieved.
Read moreVisit our Knowledge Base for technical expertise and advice, gathered over CMP's 60+ years' experience in the art of terminating cable glands.
Sign up now